Planes, Spokeshaves, Single Irons, Double Irons, Spare Parts
The Record range of bench planes is manufactured to uncompromisingly high standards. The planes feature tungsten vanadium cutter blade, accurately machined blade setting, full adjustments, selected hardwood handle and knob, cast iron base frog and lever cap, and traditional brass adjusting nut.
Smoothing Planes: The most frequently purchased plane used for final finishing work and ideal for general work.
Plane Type: Smoothing
Cutter Width: 50mm / 2"
Length: 245mm / 9.75"
Manufacturer code: T04
The Record range of bench planes is manufactured to uncompromisingly high standards. The planes feature tungsten vanadium cutter blade, accurately machined blade setting, full adjustments, cast iron base frog and lever cap, and traditional brass adjusting nut.
Jack Planes: For the preliminary squaring of rough timber. The general workhorse for stock removal.
Plane Type: Jack
Length: 355mm / 14"
Manufacturer code: T05
Fore or Jointer Planes: For removing the roughness and uneveness on long surfaces prior to smoothing.
Plane Type: Jointer
Cutter Width: 60mm / 2 3/8"
Length: 560mm / 22"
Manufacturer code: T07
The Record SP4 economy smoothing plane, with tungsten vanadium cutter is competitively priced and features, screw adjustment for depth of cut and lever for lateral adjustment.
Manufacturer code: TSP4
The record SP5 economy jack plane, with tungsten vanadium cutter is competitively priced and features, screw adjustment for depth of cut and lever for lateral adjustment.
Manufacturer code: TSP5
Fully adjustable for depth of cut. Screw adjusted cutter head by lever and cam. Lateral adjustment and mouth adjustments for coarse or fine work. 21 degree cutter angle.
Plane Type: Block
Cutter Width: 42mm / 1 5/8"
Length: 152mm / 6"
Manufacturer code: T09-1/2
Specially made to deal with plastic laminates and other man-made materials, besides wood. Cutter set at 12.1/2 degrees with mouth adjustments for coarse or fine work, and end grain. Fully adjustable for depth of cut with cutter held firmly by lever and cam.
Manufacturer code: T060-1/2
The Record 778 rebate plane has two cutter positions, one for normal rebating work and a forward position for planing into corners and difficult positions. The adjustable fence supplied can be used on either side of the plane to accurately control the size of the rebate. Cast iron body with accurately ground base. Five thread depth adjusting screw for precision control of shaving thickness.
Plane Type: Rebate
Cutter Width: 38mm / 1.5"
Length: 215mm / 8.5"
Manufacturer code: T778
Replacement Single Iron for the Record 778 Rebate Plane.
Size: 1½"
Manufacturer code: T778-D
Designed for final finishing of cabinet work and general joinery work. Simple rapid adjustment mechanism with easy removal of blade for sharpening. Accurately machined fine grey iron castings. Black epoxy finish with plated parts and chrome carbon cutter.
Plane Type: 4 Smoothing
Manufacturer code: 1-12-004
Plane Type: 4 ½ Smoothing
Length: 255mm / 10.25"
Manufacturer code: 1-12-045
Designed for stock removal when preparing timber prior to finishing. Machined frog and cutter seatings to eliminate blade chatter. Unbreakable plastic handles and special cap iron design which curves shavings and prevents clogging.
Plane Type: 5 Jack
Manufacturer code: 1-12-005
The fore plane performs a dual role between stock removal and truing up long edges or levelling wide boards.
Plane Type: 6 Fore
Length: 455mm / 18"
Manufacturer code: 1-12-006
The jointer plane performs a dual role between stock removal and truing up long edges or levelling wide boards.
Plane Type: 7 Jointer
Manufacturer code: 1-12-007
Fine grey iron base accurately machined for stability and precision in use. Chrome carbon cutter with simple lateral and depth adjustment. Virtually unbreakable high impact injection moulded handles for comfort and long life.
Plane Type: Single Blade
Cutter Width: 45mm / 1.75"
Length: 220mm / 8.75"
Manufacturer code: 1-12-033
Fully adjustable for cutter alignment and depth of cut. Fine grey iron base with handle and knob in high impact polystyrene. Chrome carbon steel cutters.
Type: Smoothing
Manufacturer code: 1-12-204
Type: Jack
Manufacturer code: 1-12-205
Made from fine grey iron with all working surfaces accurately machined for precise results. Two cutter positions for regular and bull nose work. The cutter is adjustable for depth of cut in the rear position. To accurately control dimensions of the rebate, an adjustable fence and depth gauge are supplied. A cutting spur is also provided for cross grain work.
Type: Rebate
Length: 250mm / 10"
Manufacturer code: 1-12-078
Adjustable for depth of cut and alignment. A general purpose adjustable block plane.
Type: 220
Cutter Width: 40mm
Length: 180mm / 7"
Manufacturer code: 1-12-220
Non-adjustable general purpose block plane.
Type: 110
Length: 150mm / 6"
Manufacturer code: 1-12-116
Type: 102G
Cutter Width: 35mm
Length: 140mm / 5.5"
Manufacturer code: 1-12-102
Traditional Bench Plane, suitable for both hard and soft woods. Hardwood handle and knob for comfort. Precision machined for accurate adjustment.
Designed for stock removal when preparing timber prior to finishing. A high quality machined base jack plane. Fitted with a traditional wood handle for comfort and control.
Presented in a hinged wooden box.
Replacement blade for No.4 and No.5 Faithfull planes. Width 50mm (2").
This very exceptional set has been specially commissioned to provide the essentials you need if you enjoy working with wood. All the tools are made to the highest quality from the finest rosewood, brass and steel.
The set includes a traditional No 4 smoothing plane, block plane, 9" try square, 9" sliding bevel, and a mortice and marking gauge.
This is a super gift for the professional, enthusiast, or apprentice.
The most popular size of block plane, manufactured from a fine quality grey iron casting. Ideal for end grain work. Supplied in a wooden box.
Type: No.60.1/2 Block
Length: 160mm
Quality cast iron body. Accurately ground base. Two position cutter for rebate and bull nose work. Double sided adjustable fence. Accurate depth stop.
Type: 778 Rebate Plane
Fully adjustable for depth of cut with twin thumbscrews. Available in fine grey iron with flat bottom. Precision machined bases are suitable for work on any convex surface. Replaceable Sheffield steel cutters.
Type: 151 Flat
Cutter Width: 55mm / 2 1/8"
Manufacturer code: 1-12-151
Fully adjustable for depth of cut with twin thumbscrews. Available in fine grey iron with flat bottom. Precision machined bases are suitable for work on any concave surface. Replaceable Sheffield steel cutters.
Type: 151R Round
Manufacturer code: 1-12-152
All Stanley replacement plane irons are made from chrome carbon steel which has excellent edge retention characteristics and allows a razor sharp edge to be honed. All cutters are fine rotary ground to give a flat surface that is easier to sharpen.
2" single iron to fit Stanley 4 and 4C (112004, 112005, 112204, 112205, 112014, and 112015) planes.
Manufacturer code: 0-12-313
Useful shaping tool for convex curves. The malleable iron handles are virtually unbreakable and designed for a lifetimes use. Fully adjustable cutter made from top quality tool steel to create and retain a keen cutting edge.
Type: Convex
Manufacturer code: TA151
Useful shaping tool for curved surfaces. The A151R is for concaved surfaces. The malleable iron handles are virtually un-breakable and designed for a lifetimes use. Fully adjustable cutter made from top quality tool steel to create and retain a keen cutting edge.
Type: Concave
Manufacturer code: TA151R
Faithfull spokeshaves have virtually unbreakable, malleable iron bodies, with the cutting blade held securely in place by a lever cap and 2 retaining screws. The cutter is fully adjustable and can be finely set for delicate work. The flat spokeshave is primarily used for chamfering and cutting convex shapes in wood, whereas the round spokeshave is used for cutting concave shapes.
Type: Flat
Cutter Width: 54mm / 2 1/8"
Manufacturer code: RI58-CTSS0151F
Faithfull spokeshaves have virtually unbreakable malleable iron bodies, with the cutting blade held securely in place by a lever cap, and two retaining screws. The cutter is fully adjustable and can be finely set for delicate work. The flat spokeshave is primarily used for chamfering and cutting convex shapes in wood, whereas the round spokeshave is used for cutting concave shapes.
Type: Round
Manufacturer code: RI58-CTSS0151R
The ultimate woodworking set made from the finest quality woods, steel and brass. Contains a No.4 plane, 230mm sliding bevel, 230mm try square and marking gauge. Supplied in a wooden presentation case.
Manufacturer code: FAIPLANEKIT