18V Cordless Misc
Misc 18V Cordless

 

Caulking Guns, Inflators, Metal Shear, Nailers, Planers, Radios, Spiral Saws, Staplers, Torches, Vacuums

Makita 18v LXT Metal Shear Body Only - BJS130Z

3520
!

18v Cordless Metal Shear body only - BJS130Z. Head rotates through 360 degrees for optimum manoeuvrability.

Specification:
Cutting Capacity: Mild Steel 1.3mm, Cutting Capacity: Stainless Steel 1.0mm
Strokes per minute: 2.800spm
Body only

Please note: picture shows this model with a battery but the battery is not included.

Makita 18v LXT Stapler Body Only - BST221Z

3521
!

18v Cordless Stapler body only - BST221Z.

Specification:
Staple Range: 10, 13, 16, 19, 22mm
Staple Width: 10mm, Staple Gauge: 0.6 x 1.2mm
Magazine Capacity: Max98 84 per sheet
Body only

Please note: picture shows this model with a battery but the battery is not included.

Dewalt 18V Cordless Straight Nailer 16 Gauge DC616KB with 2 x 2.6Ah Ni-Mh - DEWDC616KB

3656
!

The tool works as fast as you do with consistent nail penetration. The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed. Headlights provide increased visibility in low-light conditions or confined areas without any light. Depths can be easily referenced utilising numbered dial and user does not sacrifice performance when changing depths. User can engage contact trip lock-off and prevent accidental dis-charge of fastener. Provides increased durability over current cordless nailers and provides easy access for troubleshooting and service on the job-site or by a service technician. Provides easy access to the nosepiece for the simple removal of a jammed fastener without the use of screwdrivers or tool wrenches. Versatility in the loading and unloading of fasteners - straight magazine 110 nail capacity. Provides increased portability and versatility on the job-site. Increased visibility and durability along with protection for work-surface from the contact-trip. Will accept Paslode straight nails. Top cap is impact resistant and easy to remove for troubleshooting.

Applications - For new construction and remodelling applications, door and window trim, panelling, baseboard, casing, cabinetry, crown molding, door jambs, cap and shoe molding.

Standard Equipment: 30 Min charger, 2 batteries, Dewalt safety glasses, reversible belt hook, no mark tip, heavy-duty carry case.

Specifications:-
Nail Diameter 1.6 mm
Battery 2.6 NiMH Ah
Magazine angle 0 °
Nail Length 32-63 mm
Magazine capacity 110 Nails
Magazine loading Rear - load
Operating pressure range NA Bar
Air consumption per shot @6.9 Bar NA l
Firing mode Bump & Sequential
Nailer Operating Mode Selective
Integrated Belt Hook
Jam Clearing
Features LED indicators.

Manufacturer code: DC616KB

Makita 18v Torch Body Only - BML185

3546
!

18v Cordless Torch Body Only - BML185. Rubberised soft grip of ergonomic design. 4 position pivoting head. Replacement Xenon bulb. Falling impact strength of 1m.

Body only (battery is not included).

Please note - although the picture shows a battery, the battery is not included.

Makita 18v Torch Lamp Body Only - BML184

3552
!
18v Cordless Torch Lamp body only - BML184.

Specification:
Body only (battery not included)

Please note - although the picture shows a battery, the battery is not included.

Dewalt 18V Cordless Flashlight DW908 Body Only - DEW908

3673
!

Ideal portable lighting (body only) which uses the same battery packs (not included) as those used for DeWalt cordless drills. The flashlight has a pivoting head which rotates 90°. Provides up to 3 hour continuous use. Body only (battery and charger not included). Bulb type Xenon. Battery type 18 Volt (not included). Body only.

Manufacturer code: DW908-XJ

Dewalt 18V Cordless Flexible Floodlight DW919 Body Only - DEW919

3677
!

Ideal portable lighting (body only) which uses the same battery packs (not included) as those used for DeWalt cordless drills. The swan neck floodlight offers greater flexibility in more awkward lighting situations. Provides up to 3 hour continuous use. Bulb type Xenon. Battery type 18 Volt (battery and charger are sold separately). Body only.

Manufacturer code: DW919-XJ

Please note: although the picture shows this item with a battery, a battery is not included.

Dewalt 18V Fluorescent Light Bare Unit DC527N Body Only - DEWDC527N

3679
!
DeWalt Fluorescent Light - Bare Unit. Compact, lightweight design with impact resistant housing. 3.5 hours continuous run time with a 2.0Ah NiCd battery pack (not included). Battery and charger sold separately (not included). Rubber overmold for increased durability. 4 prong bulb for added bulb stability. 360 degree rotatable hook for hanging from different materials in different applications.

Specifications:-
Bulb Type: Fluorescent
Battery Type: 18 V (not included)
Body only.

Manufacturer code: DC527N-XJ

Dewalt 18V Wet N Dry Vac Bare Unit DC515N Body Only - DEWDC515N

3670
!

DeWalt Cordless Vacuum Wet & Dry Body Only with the following features: Runs off current 18 Volt battery platform allowing quick and easy change between different tools with a single battery. The rubber hose is extendable to 1 meter for added flexibility for a wide range of applications. 1.9L tank capacity allows for the cleaning up of larger amounts of material. High efficiency filter traps 99.7% of dust as small as drywall and cement dust. Single latch tank removal allows for quick and easy emptying of the tank. Heavy-duty washable filter. Body only (battery not included).

Includes: 1 metre heavy-duty rubber hose, crevice tool, wide nozzle.

Specifications:-
Power Input: 180 Watts
Max. Airflow: 15.9 l/sec
Tank volume: 1.9 l
Power Source: DC
Battery: Not included
Voltage (DC Operation): 18 V
Hose Nozzle Outside Diameter: 32 mm
Blower: No
Body only.

Manufacturer code: DC515N-XJ

Ryobi 18V One+ Spiral Saw CSS-1801M Body Only - RYBCSS1801M

Now Only
3663
!
Special offer price until 29.03.10 or while stocks last - Was £58.99

Specifications: 18V CSS-1801M Spiral Saw body only. Compact tool ideal for fast precision cutting and trimming of a variety of materials. Accepts 6.35mm and 3.2mm bits for a variety of cutting applications. No load speed 22,500rpm. Spindle lock for easy one-wrench bit change. Adjustable depth setting for cutting various types of material. Ergonomically designed to improve user comfort.

Body only.

Manufacturer code: CSS-1801M

OUT OF STOCK

Ryobi 18V One+ Radio CRA-180M Body Only - RYBCRA180M

3665
!

Features: Auxiliary jack compatible with MP3, CD players, etc. Convenient switch from FM to auxiliary input. On/off switch via volume control dial. Manual and automatic tuning. Fold out flexible antenna. Low battery indicator. 90mm speaker. Speaker output: 3w. Speaker diameter: 90mm. Frequency: 87.5-108FM MHz. Body only (battery not included).

Manufacturer code: CRA-180M

Ryobi 18V One+ Inflator CP-180M Body Only - RYBCP180M

3666
!

One + Battery System (no battery or charger supplied). High pressure inflation for tyres and sport balls. Low pressure, high volume for air mattresses, rafts, and inflatables. LCD display for digital readout during high pressure inflation. Lock-on button allows automatic inflation up to 40psi, manual inflation to 150psi. Plus and minus buttons to select required pressure for automatic inflation. Tethered storage caps with adaptor tray prevent loss of accessories. Body only (battery not included).

Manufacturer code: CL-180M