LUTON HIRE CENTRE

Traditionally used for cement finishing. This trowel has a lightweight magnesium blade (lighter than traditional trowels). The edges are bevelled at each end and the blade is attached to a straight grain bow handle.

Handle: Hardwood

Blade Size: 400mm x 78mm / 16" x 3 1/8"

Manufacturer code: M145

The red sponge rubber float has been specially bonded to the aluminium backing plate for long wear. A fine open-cell pad with a smooth handle.

Type: Fine cell

Blade Size: 225mm x 100mm / 9" x 4"

Thickness: 19mm / 0.75"

Manufacturer code: M38

The red sponge rubber float has been specially bonded to the aluminium backing plate for long wear. A coarse cell pad with a smooth handle.

Type: Coarse cell

Blade Size: 225mm x 100mm / 9" x 4"

Thickness: 19mm / 0.75"

Manufacturer code: M39

Straight grain wooden float, ¾" thick seasoned wood with smooth finish. Generally used for skimming and to give a sandy surface finish to rendering concrete or plaster.

Blade Size: 300mm x 125mm / 12" x 5"

Thickness: 19mm / ¾"

Manufacturer code: M44

A plasterering finishing trowel. Wooden banana shaped handle. Aluminium mounting riveted to tempered steel blade.

Handle: Wooden

Blade Size: 280mm x 120mm / 11" x 4¾"

Manufacturer code: R198

A plasterering finishing trowel in stainless steel. Wooden banana shaped handle. Aluminium mounting riveted to stainless steel blade.

Handle: Wooden

Blade Size: 280mm x 120mm / 11" x 4¾"

Manufacturer code: R198S

A plasterering finishing trowel. Banana shaped plastic handle. Aluminium mounting riveted to tempered steel blade.

Handle: Plastic ABS

Blade Size: 280mm x 120mm / 11" x 4¾"

Manufacturer code: R318

A plasterering finishing trowel in stainless steel. Banana shaped plastic handle. Aluminium mounting riveted to stainless steel blade.

Handle: Plastic ABS

Blade Size: 280mm x 120mm / 11" x 4¾"

Manufacturer code: R318S

A plasterering finishing trowel. Banana shaped plastic handle. Aluminium mounting riveted to tempered steel blade.

Handle: Plastic ABS

Blade Size: 350mm x 125mm / 14" x 5"

Manufacturer code: R318L

This skimming float is designed to scrub and give a sandy surface finish to rendering concrete or plaster. The 812 is a straight grain float which has a working surface made of selected stable timber with a comfortable beechwood handle.

Type: Straight Grain

Blade Size: 312mm x 119mm / 12½" x 4¾"

Manufacturer code: 812

This skimming float is designed to scrub and give a sandy surface finish to rendering concrete or plaster. The 810 cross grained float has a heavier face with the grain running at right angles to the handle which is fitted to the base by means of a tapered dovetailed slide to maintain flatness.

Type: Cross Grain

Blade Size: 275mm x 125mm / 11" x 5"

Manufacturer code: 810

Emir plastic floats are one piece mouldings made from structural foamed urethane of a hard wearing quality. This gives a lightweight stable construction, which can be guaranteed not to warp. The chequered face is completely non-absorbent and holds plaster or render well to give a matt textured finish. Super light for overhead working.

Type: Small Float Superlight

Blade Size: 275mm x 108mm / 11" x 4"

Manufacturer code: 710

Emir plastic floats are one piece mouldings made from structural foamed urethane of a hard wearing quality. This gives a lightweight stable construction, which can be guaranteed not to warp. The chequered face is completely non-absorbent and holds plaster or render well to give a matt textured finish. Super light for overhead working.

Type: Large Float Superlight

Blade Size: 350mm x 150mm / 14" x 6"

Manufacturer code: 720

Emir plastic floats are one piece mouldings made from structural foamed urethane of a hard wearing quality. This gives a lightweight stable construction, which can be guaranteed not to warp. The chequered face is completely non-absorbent and holds plaster or render well to give a matt textured finish. A large float suitable for concrete and sharp sand renders.

Type: Extra-Duty Superlight

Blade Size: 350mm x 150mm / 14" x 6"

Manufacturer code: 721

Emir plastic floats are one piece mouldings made from structural foamed urethane of a hard wearing quality. This gives a lightweight stable construction, which can be guaranteed not to warp. The chequered face is completely non-absorbent and holds plaster or render well to give a matt textured finish.

Type: Small Float

Blade Size: 275mm x 108mm / 11" x 4"

Manufacturer code: 71

Emir plastic floats are one piece mouldings made from structural foamed urethane of a hard wearing quality. This gives a lightweight stable construction, which can be guaranteed not to warp. The chequered face is completely non-absorbent and holds plaster or render well to give a matt textured finish.

Type: Large Float

Blade Size: 350mm x 150mm / 14" x 6"

Manufacturer code: 72

A plasterers and wet trade float designed for comfort in use, lightweight, stable and long wearing. Rubber sponge float for applying one-coat finishes.

Type: Rubber Sponge Float

Blade Size: 275mm x 108mm / 11" x 4"

Manufacturer code: 713