LUTON HIRE CENTRE

165mm Plunge Saw and Guide Rail - SP6000K1. Highly accurate clean cutting plunge saw. Non-slip rubberised grip. Electronic control. Mechanical brake. Also designed for easy blade replacement.

Standard Equipment: carbide-tipped saw blade, hex wrench, guide rail

Specification:

Max Cut @ 90°: 55mm, Max Cut @ 45°: 39mm, Blade Diameter: 165mm,

Bore Diameter: 20mm, Input wattage: 1,300w, No Load Speed: 2,000-5,200 rpm

Carry case included

Electric brake

Double insulated

Soft start

Variable speed trigger

110V or 240V

Circular Saw 165mm - 5604R. Over 2" maximum depth of cut. Supplied with anti-kickback riving knife.

Standard Equipment: Carbide-tipped saw blade, rip fence (guide rule), hex wrench, riving knife

Specification:

Max Cut @ 90°: 54mm, Max Cut @ 45°: 35mm, Blade Diameter: 165mm,

Bore Diameter: 20mm, Input wattage: 950w, No Load Speed: 5,000rpm

Double insulated

110V or 240V

Circular Saw 190mm - 5704RK. Over 2" maximum depth of cut. Supplied with anti-kickback riving knife. Low noise and vibration for operator comfort. All ball bearing construction for prolonged service life. Rugged for general site use. One of the most popular saws in the UK.

Standard Equipment: Carbide-tipped saw blade, rip fence (guide rule), hex wrench

Specification:

Max Cut @ 90°: 66mm, Max Cut @ 45°: 46mm, Blade Diameter: 190mm,

Bore Diameter: 30mm, Input wattage: 1,200w, No Load Speed: 4,900rpm

Carry case included

Double insulated

110V or 240V

Circular Saw 190mm - 5703RK. Ideal for use in workshop and on site.

Standard Equipment: Carbide-tipped saw blade, rip fence (guide rule), hex wrench

Specification:

Max Cut @ 90°: 0-66mm, Max Cut @ 45°: 46mm, Blade Diameter: 190mm,

Bore Diameter: 30mm, Input wattage: 1,300w, No Load Speed: 4,800rpm

Carry case included

Double insulated

110V or 240V

Circular Saw 190mm - 5017RKB. Base angles for bevel cuts to 45 degrees. Supplied with anti-kickback riving knife.

Standard Equipment: Carbide-tipped saw blade, rip fence (guide rule), hex wrench

Specification:

Max Cut @ 90°: 66mm, Max Cut @ 45°: 46mm, Blade Diameter: 190mm,

Bore Diameter: 30mm, Input wattage: 1,400w, No Load Speed: 4,800rpm

Double insulated

240V

Circular Saw 235mm and carrying case - 5903RK. For all-round easier operation. Easier, more efficient chip / sawdust ejection. With anti-kickback riving knife.

Standard Equipment: Carbide-tipped saw blade, rip fence (guide rule), hex wrench

Specification:

Max Cut @ 90°: 85mm, Max Cut @ 45°: 64mm, Blade Diameter: 235mm,

Bore Diameter: 30mm, Input wattage: 1,550w, No Load Speed: 4,500rpm

Carry case included

Electric brake

Double insulated

Soft start

110V or 240V

Circular Saw 235mm. For all-round easier operation - 5903R. Easier, more efficient chip / sawdust ejection. With anti-kickback riving knife.

Standard Equipment: Carbide-tipped saw blade, rip fence (guide rule), hex wrench

Specification:

Max Cut @ 90°: 85mm, Max Cut @ 45°: 64mm, Blade Diameter: 235mm,

Bore Diameter: 30mm, Input wattage: 1,550w, No Load Speed: 4,500rpm

Electric brake

Double insulated

Soft start

110V or 240V

Circular Saw 270mm - 5103R. Soft-Start for smooth start up and greater control. Machine is fitted with a safety clutch and Electronic-brake. Supplied with anti-kickback riving knife.

Ideal for restoration.

Standard Equipment: Carbide-tipped saw blade, rip fence (guide rule), hex wrench

Specification:

Max Cut @ 90°: 100mm, Max Cut @ 45°: 73mm, Blade Diameter: 270mm,

Bore Diameter: 30mm, Input wattage: 2,100w, No Load Speed: 4,000rpm

Electric brake

Double insulated

Soft start

110V

Circular Saw 355mm - 5143R. Soft-Start for smooth start up and greater control. Machine is fitted with a safety clutch and electronic-brake. Supplied with anti-kickback riving knife. Ideal for restoration.

Standard Equipment: carbide-tipped saw blade, rip fence (guide rule), hex wrench

Specification:

Max Cut @ 90°: 130mm, Max Cut @ 45°: 90mm, Blade Diameter: 355mm,

Bore Diameter: 30mm, Input wattage: 2,200w, No Load Speed: 2,700rpm

Electric brake

Double insulated

Soft start

110 Volt

The Dewalt D23620K and D23620KL is a robust, well balanced and easy to use 240 Volt/110 Volt circular saw with a 184mm blade and a 62mm depth of cut. It has quick and easy depth and angle adjustment for any job application, and is equipped with a high torque motor that gives durability and power for cutting jobsite and joinery materials. With pressed steel shoe for strength and durability and efficient dust extraction port to minimise airborne dust particles when connected to an extractor unit or vacuum. The gears and drive spindles are mounted in a durable cast aluminium housing, and guiding notches at 90 and 45 degrees provide good cut line visibility. A large retraction lever enables safe operation of lower guard.

Specifications:-
Power Input: 1,150 Watts. Power Output: 570 Watts. No Load Speed: 5,000 /min.
Blade Diameter: 184 mm. Blade Bore: 16 mm.
Bevel Capacity: 50 °.
Max. Depth of Cut at 90°: 62 mm, at 45°: 45 mm.

Includes: 18 tooth Series 30® saw blade, rip fence, blade spanner, heavy-duty carrying case.

Handy and powerful circular hand saw just right for hard continuous working. Toolless cutting depth adjustment. Toolless saw table adjustment. TCT saw blade. Splitter.

Power: 1200 Watt, Speed: 4800 min-1
Cutting depth: 55 mm (90°), 37 mm (45°)
Saw blade Ø 160 x Ø 20 x 2,5 mm, No. of teeth: 24

Supplied with: Parallel guide, dust extractor adapter, TCT saw blade, tool to change the saw blade.