LUTON HIRE CENTRE

Metal Cutter 185mm. Minimal burrs and burns. Ideal for cladding. One touch removal dust-box.

Includes free: MT952 Makita 115mm angle grinder. 

Standard Equipment: Blade, wrench, goggles

Specification:

Blade Diameter: 185mm, Depth of Cut @ 90°: 63mm, No Load Speed: 3,500rpm, Input wattage: 1,100w

Double insulated

110V

Shear. Body grip design with a paddle switch for easy one handed operation. Features a lower scrap guide to protect the operator's hands, a lock-off switch and built in thickness gauge. Extremely light (weighs only 1.7kg).

Standard Equipment: 2 blades, 3mm hex wrench, wrench holder

Specification:

Max. Cut in Mild Steel: 1.6mm, Max. Cut in Stainless Steel: 1.2mm,

Min. Cutting Radius: 30mm R/H, Strokes per minute: 4,000spm, Input wattage: 300w

Double insulated

110V or 240V

Shear. Features double blade for less material deformation than single blade shears. Adjustable blade for different material thickness enable cuts with minimal burrs.

Standard Equipment: 3mm hex wrench, thickness gauge set, wrench holder

Specification:

Max. Cut in Mild Steel: 1.6mm, Max. Cut in Stainless Steel: 1.2mm,

Max. Cut in Aluminium: 2.5mm, Strokes per minute: 4,500spm, Input wattage: 260w

Double insulated

110V or 240V

Shear. Cuts with no material loss in the kerf as with nibblers. Highly visible sight line for precise following of patterns. Large top handle for positive control. Blades have 4 cutting edges each. Built-in thickness gauge for convenience.

Standard Equipment: 2 shear blades, 4mm hex wrench, thickness gauge

Specification:

Max. Cut in Mild Steel: 3.2mm, Max. Cut in Stainless Steel: 2.5mm,

Min. Cutting Radius: 50mm R/H, Strokes per minute: 1,600spm, Input wattage: 660w

Carry case included

Double insulated

110V or 240V

Nibbler. Zips through sheet metal, plastics and other sheet materials. Built-in thickness gauge for convenience. Easy punch and die replacement for reduced down time.

Standard Equipment: 3mm hex wrench, punch & die set, spacers x 2

Specification:

Max. Cut in Mild Steel: 3.2mm, Max. Cut in Stainless Steel: 2.5mm,

Min. Cutting Outside Edge: 128mm, Radius Inside Edge: 120mm, Strokes per minute: 1,300spm,

Input wattage: 660w

Carry case included

Double insulated

110V or 240V

Die Grinder. Ergonomically designed slim body for grinding in tight spots. Internal labyrinth construction seals motor and bearings from contamination.

Standard Equipment: Hex wrench 13 x 2

Specification:

Collet Capacity: 6mm, No Load Speed: 25,000rpm, Input wattage: 400w,

Dimensions: 285 x 74 x 74mm

Double insulated

110V or 240V

Low Speed Die Grinder. Ergonomically designed slim body for grinding in tight spots. Makita's exclusive Super Joint System helps prevent kickback. Internal labyrinth construction seals motor and bearings from contamination.

Standard Equipment: 6mm Collet Cone, 2 x Wrench

Specification:

Collet Capacity: 6mm, No Load Speed: 1,800-7,000rpm, Input wattage: 750w

Double insulated

Electronic speed control

Soft start

110V

High Speed Die Grinder. Slim body for grinding in tight spots. Makita's exclusive Super Joint System prevents kick-back.

Standard Equipment: 6mm Collet Cone, 2 x Wrench

Specification:

Collet Capacity: 6mm, No Load Speed: 7,000-28,000rpm, Input wattage: 750w

Double insulated

Electronic speed control

Soft start

110V or 240V