LUTON HIRE CENTRE

40mm Rotary Demolition Hammer SDS Max - HR4001C. Electronic-power-control for greater comfort. Torque-limiter for additional operator protection. Low vibration enables prolonged use.

Includes free: GA9020 Makita 230mm Angle Grinder. 

Standard Equipment: Bit Grease, Depth Stop, Side Handle

Specification:

Max in Concrete: 40mm, Max Core Diameter (TCT): 105mm, Joules: 9.5Js,

Blows per minute: 1,350-2,700bpm, No Load Speed: 180-265rpm, Input wattage: 1,100w

Carry case included

Double insulated

Hammer only

Rotary hammer action

Anti vibration system

Electronic speed control

110V or 240V

Drill bit not included

40mm Rotary Demolition Hammer SDS Max AVT - HR4011C. Low vibration enables much greater utilisation by one operator. Electronic-power-control for greater comfort. Torque-limiter for additional operator protection.

Includes free: GA9020 Makita 230mm Angle Grinder. 

Standard Equipment: Bit Grease, Depth Stop, Side Handle

Specification:

Max in Concrete: 40mm, Max Core Diameter (TCT): 105mm, Joules: 9.5Js,

Input wattage: 1,100w, Blows per minute: 1,350-2,700bpm

Carry case included

Double insulated

Hammer only

Rotary hammer action

Anti vibration system

Electronic speed control

110V or 240V

Drill bit not included

52mm SDS Max Rotary Demolition Hammer - HR5211C. Torque Limiter. Vibration absorbing soft grip handle.

Includes free: GA9020 Makita 230mm angle grinder. 

Standard Equipment: Case, 2 x side handle assembly, depth stop

Specification:

Vibrations per Minute: RH = 12.5 HO = 11.0 with D handle, Max in Concrete: 52mm,

Core Bit Diameter (TCT): Max.160mm, Joules: 19.7Js, Blows per minute: 1,075-2,150bpm,

No Load Speed: 130-260rpm, Input wattage: 1,500w

Carry case included

Rotary hammer action

Anti vibration system

110V or 240V

Rotary Demolition Hammer Drill SDS Max with AVT - HR4511C. Reduced vibration for less operator fatigue. Torque-limiter for additional operator protection.

Includes free: GA9020 Makita 230mm angle grinder.

Standard Equipment: 2 side handles, depth stop, bit grease

Specification:

Max in Concrete: 45mm, Core Bit Diameter (TCT): max. 125mm, Joules: 13Js,

Blows per minute: 1,250-2,750bpm, No Load Speed: 130-280rpm,

Input wattage: 1,350w, Vibration: RH 7.5m/sec² HO 7.0m/sec² D handle

Carry case included

Double insulated

Hammer only

Rotary hammer

Anti vibration system

110V or 240V